ARMANO Instruments, Inc.
600 Century Plaza Drive
Suite C-105
Houston, Texas 77073
Phone: +1 281 982 3333
E-Mail: mail@armano-instruments.com
Comparison pumps (data sheet 10 151)
Plate version
The comparison pump model PH 60-P is a pressure generator and used for comparative measurements. It is suitable for testing and adjusting pressure measuring devices of all kinds.
model | PH 60-P |
---|---|
version | pneumatic version |
construction | plate version |
medium | dry, clean, non-corrosive gas |
special version | for oxygen: wetted parts: free of grease and oil cylinder: blue enamelled |
pmin (operating volume ≤0.1 litre) | -0.5 bar (without external vacuum supply) |
pmax (operating volume ≤0.1 litre) | 4 bar (without external pressure supply) |
recommended admission pressure | -1 / +60 bar (for higher pressure ranges) |
standard connection | 2 connections male G ½ LH, each with 2 clamping sleeves on G ½ right or M 20x1.5 right, incl. double sealing |
The model is applicable for pressure ranges from −1 to +60 bar. For testing, only gaseous, non-aggressive media shall be used.
Gauge pressure from −0.5 bar up to +4 bar can be generated with the installed spindle pump (ambient air). An external compressed air supply and vacuum generation (vacuum pump) is required for higher pressure and vacuum ranges respectively.
The test item is compared to a pressure measuring device with higher accuracy (e.g. Overview 2000 Test Gauges, Overview 10000 Calibration Technology).
Comparison pumps on a base plate are small, lightweight, handy and can be mounted easily on a workbench or applied mobile on site.